Corvette V8-6.0L VIN U (2005)
Parking Lamp: Description and Operation
PARK, TAIL, LICENSE AND MARKER LAMPS
Battery voltage is applied at all times from the PK LAMPS fuse to both coil and switched sides of the PARK LAMP Relay located in the underhood fuse
block. Ground is applied at G201 to the turn signal/multifunction switch at all times. When the headlamp switch is place in either the HEAD or PARK
position, ground is applied to the park lamp relay control circuit. This energizes the PARK LAMP Relay and applies battery voltage to all park, tail,
license, and marker lamps. Ground for the front park and marker lamps is supplied at G101 for the left and G102 for the right. Ground for the license,
tail, and rear side marker lamps is supplied at G302.
