Corvette V8-6.0L VIN U (2005)
Position the jack stand support pads as follows:
Spanning the 2 suspension crossmember ribs (1).
Under the Rear Suspension Crossmember
IMPORTANT
-
The jack stand lift pads must not come in contact with the rear suspension monoleaf spring.
-
Carefully observe the following:
-
Be sure to place a block or pad between the jack stand lift pads and the vehicle.
-
Make sure the jack stand lift pads span at least 2 suspension crossmember ribs (1).
-
Support only in the areas shown.
Position the jack stand support pads as follows:
Spanning the 2 suspension crossmember ribs (1).
