Corvette V8-6.0L VIN U (2005)
IMPORTANT
-
The jack stand support pads must not come in contact with the engine oil pan (2) or the front suspension monoleaf spring.
-
Carefully observe the following:
-
Be sure to place a block or pad between the jack stand support pads and the vehicle.
-
Make sure the jack stand support pads span at least 2 suspension crossmember ribs (1).
-
Support only in the areas shown.
Position the jack stand support pads as follows:
-
In the preferred location (3) if possible, spanning at least 2 of the suspension crossmember ribs (1).
-
In the optional location (4) if necessary, spanning at least 2 of the suspension crossmember ribs (1).
Under the Front Suspension Crossmember - Optional Front Location
IMPORTANT
-
The jack stand support pads must not come in contact with the front suspension monoleaf spring.
-
Carefully observe the following:
-
Be sure to place a block or pad between the jack stand support pads and the vehicle.
-
Make sure the jack stand support pads span at least 2 suspension crossmember ribs (1).
-
Support only in the areas shown.