Corvette V8-6.0L VIN U (2005)
5. Reinstall the carpet to its original position.
6. If you are installing a new or replacement BCM, program the BCM to the current vehicle. Refer to Body Control Module (BCM)
Programming/RPO Configuration. See: Testing and Inspection/Programming and Relearning
Door Control Module Replacement - Front
DOOR CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the window regulator.
IMPORTANT: The door control module is part of the power window regulator and is serviced as an assembly.
INSTALLATION PROCEDURE
1. Install the window regulator to the door.
2. Install the door trim panel.