Corvette V8-6.0L VIN U (2005)
1. Coat the threads of the heated oxygen sensor with the anti-seize compound P/N 5613695, or the equivalent if necessary.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bank 1, oxygen sensor 2 (2), in the catalytic convertor.
Tighten the oxygen sensor to 41 N.m (30 lb ft).
3. Reconnect the bank 1, oxygen sensor 2 (2), electrical connector to the engine wiring harness electrical connector.
4. Lower the vehicle.