Corvette V8-6.0L VIN U (2005)
6. Install the transmission range selector (shift) lever onto the transmission manual shaft. Be sure to install the shift lever in an upright orientation.
7. Using a wrench on the transmission manual shaft wrench flats (in order to keep the shaft from turning), install the range selector (shift) lever
retaining nut.
^
Tighten the transmission range selector lever nut to 20 Nm (15 ft. lbs.).
8. Connect the park/neutral position switch electrical connectors.
9. Install the transmission shift control cable and bracket into position.
10. Align the shift control cable end to the transmission shift lever stud.
11. Important: Use care to not suddenly jerk the shift control cable during assembly, the shift control cable rod end guide tubes are EXTREMELY
INFLEXIBLE and capable of only a SLIGHT bend.
CAREFULLY secure the shift control cable end clip to the transmission shift lever stud.
12. Install the nuts retaining the transmission shift control cable bracket to the transmission.
^
Tighten the transmission shift control cable bracket retaining nuts to 20 Nm (15 ft. lbs.).
13. Install the intermediate exhaust pipe.