Corvette V8-6.0L VIN U (2005)
1. Route the EVAP purge pipe through the right tunnel brace opening.
CAUTION: Refer to Fuel and EVAP Pipe Caution in Service Precautions.
2. Connect the EVAP purge pipe to the canister.
3. Remove the cap from the chassis EVAP purge pipe.
4. Connect the rear EVAP purge pipe (1) to the chassis EVAP purge pipe (3).
5. Install the EVAP vent valve (2) to the bracket (1).
6. For vehicles equipped with automatic transmission, install the right muffler.
7. Install the EVAP canister access cover.
8. Install the right rear wheelhouse panel.
9. Lower the vehicle.