Corvette V8-6.0L VIN U (2005)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor Replacement
CRANKSHAFT POSITION (CKP) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Raise the vehicle. Refer to Vehicle Lifting.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
3. Remove the starter.
4. Disconnect the crankshaft position (CKP) sensor electrical connector.
5. Remove the CKP sensor retaining bolt.
IMPORTANT: Clean the area around the CKP before removal in order to avoid debris from entering the engine.
6. Remove the CKP sensor.
INSTALLATION PROCEDURE
