Corvette V8-6.0L VIN U (2005)
tank reading.
-
Empty 40 ohms resistance
-
Full 250 ohms resistance
9. Connect the jet line insert connector into the crossover tube to fuel tank opening.
IMPORTANT: Pull the jet line insert connector to ensure that the insert is properly attached.
10. If replacing the fuel pump module, install the FTP sensor (2).
11. Connect the FTP sensor harness connector (1).
12. Connect the fuel pump module harness connector (5).
13. Connect the EVAP purge line (4) from the fuel pump module.
14. Install the right fuel tank.
