Corvette V8-6.0L VIN U (2005)
1. Install the CKP sensor.
2. Install the CKP sensor retaining bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the CKP sensor to 25 N.m (18 lb ft).
3. Connect the CKP sensor electrical connector.
4. Install the starter.
5. Lower the vehicle.
6. Connect the negative battery cable.
7. Program the transmitters. Refer to Transmitter Programming (Domestic) Transmitter Programming (Export - Including Canada) in Keyless Entry.
8. Perform the CKP System Variation Learn Procedure. See: Testing and Inspection/Programming and Relearning
