Corvette V8-6.0L VIN U (2005)
5. Measure the D height by measuring the bottom of the strut to the support surface forward of the mounting bolt.
6. Push the rear bumper downward to 38 mm (1.5 inch).
7. Gently remove your hands.
8. Allow the vehicle to settle into position.
9. Repeat the jouncing operation 2 more times for a total of 3 times.
10. Measure the D height dimension.
11. The true D height dimension number is the average of the high and the low measurements.
12. If these measurements are out of specifications, inspect for the following conditions:
^
Improper weight distribution
^
Collision damage
^
Worn or damaged suspension components
