Corvette V8-6.0L VIN U (2005)
13. Disengage the steering column lock shoes from the dowel pins in the steering column tilt head housing assembly (1).
14. Remove the steering column tilt head housing assembly (1) with the steering shaft assembly from the jacket assembly.
15. Remove the steering shaft assembly (2) from the steering column tilt head housing assembly (1).
16. Mark the race and upper shaft assembly.
Important: Carefully mark the parts to ensure proper assembly. Failure to assemble properly will cause the steering wheel to be turned 180
degrees.
17. Mark the lower steering shaft assembly.
18. Tilt the race and upper shaft assembly 90 degrees to the lower steering shaft assembly to disengage.
19. Remove the 4 TORX head screws (2).
20. Remove the steering column support assembly (1) from the jacket assembly.
Installation Procedure
1. Install the steering column support assembly (1) to the jacket assembly.
