Corvette V8-6.0L VIN U (2005)
3. Install the steering linkage outer tie rod ball stud to the steering knuckle.
4. Install the stabilizer shaft link to the lower control arm.
^
Tighten the stabilizer shaft link nut to 72 Nm (53 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
5. Connect the wheel speed sensor electrical connector.
6. Install the brake rotor and caliper.
7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. Check the front wheel toe and adjust as necessary.