Corvette V8-6.0L VIN U (2005)
Steering Angle Sensor: Service and Repair
Steering Wheel Position Sensor or Steering Shaft Lower Bearing Replacement
Removal Procedure
1. Caution: Refer to SIR Caution in Service Precautions.
Disable the SIR system.
2. Remove the following from the steering shaft:
1. Steering shaft seal (4)
2. Sensor retainer (3)
3. Sensor assembly (2), refer to Steering Wheel Position Sensor Centering.
4. Adapter and bearing assembly (1)
Installation Procedure
1. Install the following to the steering shaft:
1. Adapter and bearing assembly (1)
2. Important: The steering shaft assembly must be rotated to the 12 o'clock position.
Sensor assembly (2), refer to Steering Wheel Position Sensor Centering.
3. Sensor retainer (3)
4. Steering shaft seal (4)
2. Enable the SIR system.
