Corvette V8-6.0L VIN U (2005)
3. Check the ball joint stud nut for a minimum final torque of 55 Nm (41 ft. lbs.).
7. Support the lower control arm with a jackstand.
8. Install the shock absorber lower mounting bolts.
^
Tighten the shock absorber lower mounting nuts to 28 Nm (21 ft. lbs.).
9. Connect the stabilizer shaft link to the lower control arm.
^
Tighten the stabilizer link nut to 72 Nm (53 ft. lbs.).
10. Remove the J 33432-A transverse spring compressor from the transverse spring.
11. Remove the jackstands from the lower control arms.
12. Install the tire and wheel assemblies.
13. Adjust the front trim height.
14. Perform a front wheel alignment.
