Corvette V8-6.0L VIN U (2005)
Fluid Filter - A/T: Service and Repair
Automatic Transmission Fluid/Filter Replacement
^
Tools Required
-
J 36850 Transmission Assembling Lubricant (Transjel(tm))
Removal Procedure
Caution: When the transmission is at operating temperatures, take necessary precautions when removing the check/fill plug, to avoid being burned by
draining fluid.
1. Raise and suitably support the vehicle.
2. Place a drain pan under the transmission.
3. Clean any dirt from around the transmission check/fill plug.
4. Remove the transmission fluid check/fill plug and allow the fluid to drain.
5. Support the transmission oil pan.
6. Remove the transmission oil pan bolts.
7. Loosely reinstall the fluid check/fill plug.
8. Lightly tap the oil pan with a rubber mallet or pry gently in order to loosen the pan.
9. Remove the transmission oil pan.
10. Drain the remaining fluid from the oil pan.
11. Important: Note the position of the filter before removal to aid in installation.
Grasp firmly while pulling down with a twisting motion in order to remove the filter.