Corvette V8-6.0L VIN U (2005)
54. Carefully position the wiring harness into the L-shaped brackets along the driveline support assembly. Align the harness retainer (locator) (1) to
the hole in the forward bracket, and secure in place.
55. Install the transmission shift cable and bracket into position.
56. Connect the transmission shift cable to the transmission shift lever.Press to secure the cable.
57. Install the transmission shift cable bracket nuts to the transmission.
^
Tighten the transmission shift cable bracket nuts to 20 Nm (15 ft. lbs.).
58. Align the transmission flexplate to the transmission torque converter using the matchmark made prior to removal.
Important: The following step must be performed to assure proper torque converter balance during installation.
59. Install the transmission flexplate to transmission torque converter bolts.
60. Install the rear bellhousing access plug.
