Corvette V8-6.0L VIN U (2005)
6. Grasp the sides of the shift control boot and apply light pressure in toward the shift control lever to begin to release the shift boot retaining tabs
from the instrument panel (I/P) accessory trim plate.
7. Using light pressure, continue to release the remaining boot retaining tabs.
8. Lift the boot away from the trim plate and remove the boot.
9. Remove the I/P accessory trim plate.
10. Remove the shift control closeout boot retaining nuts.
11. Remove the shift control closeout boot.
12. Remove the shift control assembly.
13. Remove the left I/P lower insulator panel.
14. Remove the clutch master cylinder pushrod retainer.
15. Disconnect the clutch master cylinder pushrod from the clutch pedal.