Corvette V8-6.0L VIN U (2005)
56. Position the chainfall, or equivalent, of a lift device in a way which will protect the transmission oil cooler rear pipes and the rear exhaust hangers
located on the driveline support assembly.
57. Using the lift device, raise the driveline to relieve the weight from the transmission jack.
58. Disconnect the J 42055 from the transmission jack ONLY, the J 42055 will provide stability to the driveline components while working on a
bench.
59. Position the driveline on a work bench with the lift device still attached.
60. Support the driveline support assembly and the differential for additional balance.
61. Remove the lift device from the driveline.
62. Disconnect the transmission oil cooler upper and lower pipe fittings from the transmission, then cap the pipes and plug the fittings to prevent
contamination.
63. Remove the transmission oil cooler pipe rear clip.
64. Remove the transmission oil cooler pipe middle clip.
65. Remove the transmission oil cooler pipe front and rear clamp bolts and clamps.
