Corvette V8-6.0L VIN U (2005)
11. Position the bearing housing into a press. Apply pressure to the housing and compress the wave washer in order to install the snap ring (1).
12. Install the snap ring (1) onto the hub.
Rear Bearing Housing Assembly - Automatic Transmission
1. Lubricate the NEW rear bearing housing O-rings (1) with clean engine oil.
2. Install the O-rings into the rear bearing housing.
3. Position the rear bearing housing (2) into a press in order to install the bearing (1).
Important: Press only on the outer race of the bearing.
