Corvette V8-6.0L VIN U (2005)
9. Install the hub (1) onto the flexplate spindle. Align the marks on the flexplate spindle and hub for proper assembly.
10. Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the threads of the spindle.
11. Install the nut (1) to the flexplate spindle.
^
Tighten the spindle nut to 90 Nm (66 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
Propeller Shaft Installation
1. Install a NEW bushing (1) into the automatic transmission propeller shaft, if required.
Important: Install the propeller shaft bushing into hub with the smaller opening of the bushing positioned away from the flange.