Corvette V8-6.0L VIN U (2005)
Notice: Refer to Fastener Notice in Service Precautions.
4. Loosely install the side reveal molding screws.
5. Tighten the screws in sequence (1-6), starting in the center as illustrated.
Tighten the side reveal molding screws to 2.5 N.m (22 lb in).
6. Apply sealant, install the weatherstrip retainer, the blow out clip, and the weatherstrip. Refer to Weatherstrip Side Retainer Replacement (Coupe
and Convertible) Weatherstrip Side Retainer Replacement (Hardtop).
