Corvette V8-6.0L VIN U (2005)
Windshield Washer Switch: Service and Repair
WIPERS/WASHER SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the tilt wheel lever (4).
2. Remove the driver knee bolster trim panel.
3. Separate and remove the upper (1) and the lower (3) steering column covers.
4. Disconnect the electrical connector from the wiring harness.
5. Release the upper and lower retaining clips and slide the wiper/washer switch from the steering column lock module.
INSTALLATION PROCEDURE
1. Slide the wiper/washer switch into the steering column lock module until the upper and lower retaining clips
2. Connect the electrical connector into the wiring harness.