Corvette V8-6.2L (2008)
3. Using a metal inert gas (MIG) welder, weld a 51 mm (2 in) stitch along the tow hook to the impact bar in 4 places (1).
*
Front
*
Rear
*
Inboard side
*
Outboard side
4. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair () .
5. Paint the repair area. Refer to Basecoat/Clearcoat Paint Systems (See: Body and Frame/Paint, Striping and Decals/Paint/Application and
ID/Basecoat/Clearcoat Paint Systems) .
6. Install all related panels and components.
7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair) .
8. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .