Corvette V8-6.2L (2008)
Trunk / Liftgate Shock / Support: Service and Repair
Rear Compartment Lift Window Strut Replacement
Removal Procedure
1. Open and support the rear lift window panel.
2. Disconnect the lower rear defogger electrical connector from the strut.
3. Reposition the retaining clip outward from the struts lower ball socket using a small flat-bladed tool.
4. Pull the strut from the lower ball stud.
5. Reposition the retaining clip outward from the struts upper ball socket.
6. Disconnect the electrical connector from the upper end of the strut.
7. Remove the strut from the upper ball stud.
Installation Procedure
