Corvette V8-6.2L (2008)
11. Install the power steering gear to the crossmember.
Tighten the power steering gear mounting bolts to 100 N.m (74 lb ft).
12. Install the bolts to the BPMV. Refer to Brake Pressure Modulator Valve Bracket Replacement (See: Brakes and Traction Control/Antilock Brakes
/ Traction Control Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Brake Pressure Modulator Valve Bracket
Replacement) .
13. Connect the intermediate shaft to the steering gear. Refer to Intermediate Steering Shaft Replacement (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Intermediate Steering Shaft Replacement) .
14. Install the steering linkage outer tie rod ends to the steering knuckles. Refer to Rack and Pinion Outer Tie Rod End Replacement (See: Steering
and Suspension/Steering/Tie Rod/Tie Rod End/Service and Repair) .
15. Connect the electronic suspension control (ESC) sensor links to the upper control arm, if equipped.
16. Connect the shock absorber solenoid electrical connector, if equipped.
17. Install the stabilizer shaft to the vehicle. Refer to Stabilizer Shaft Replacement (See: Steering and Suspension/Suspension/Stabilizer Bar/Service
and Repair/Front Suspension) .
18. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair)
.
19. Lower the vehicle.
20. Remove J 41803 and J 28467-B from the engine.
21. Install the generator. Refer to Generator Replacement (See: Starting and Charging/Charging System/Alternator/Service and Repair/Generator
Replacement) .
22. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair) .
23. Perform a vehicle front end alignment. Refer to Wheel Alignment Measurement (See: Maintenance/Alignment/Service and Repair/Wheel
Alignment Measurement) .