Corvette V8-6.2L (2008)
Important
Prior to installing the #5 bow link arms, lower the #1 and #5 bow to normal closed position and inspect the headliner for proper string
routing and tension.
Note
When installing the #5 bow link arms, ensure that the long headliner string is routed above the arms as shown earlier in Figure 2.
26. Install the folding top #5 bow link arms (1) and pins/spring clips.
27. Route the anti-glare cover string (shown in red above) under the #5 bow link arms, through the eyelet on the #5 bow (right arrow), through the
metal key ring (lower arrow) and then attach the screw (1) holding the end eyelet to the rear side rail, on the right and left side.
Tighten
Tighten to 2 Nm (18 lb in).
