Corvette V8-6.2L (2008)
Trim Panel: Service and Repair
Body Hinge Pillar Trim Panel Replacement
Body Hinge Pillar Trim Panel Replacement
Removal Procedure
1. Remove the fastener attaching the top of the upper trim panel and the windshield side garnish molding to the hinge pillar.
2. Unsnap the hinge pillar upper trim from the hinge pillar.
3. Remove the hinge pillar upper trim.
4. Remove the lower hinge pillar trim if needed. The lower trim is part of the sill plate. Refer to Door Sill Plate Replacement (See: Scuff
Plate/Service and Repair) .
Installation Procedure