Corvette V8-6.2L (2008)
1. Insert the release cables through the opening in the upper seat back frame.
2. Snap the release lever mechanism to the seat back frame.
3. Route the cables.
4. Install the release cables to the right and left hinges inserting the locking pins in the notches.
5. Apply LOCTITE(TM) 271 to the hinge bolts.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Install the nuts to the right and left hinge bolts.
Tighten the nuts to 24 N.m (18 lb ft).
7. Install the free play retention cable to the passenger seat back.
8. Install the seat back trim cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Front Seat Back Cushion
Cover and Cushion Pad Replacement) .
