Corvette V8-6.2L (2008)
4. Connect the surge tank inlet hose to the air bleed pipe assembly.
5. Disengage tension and reposition the surge tank inlet hose clamp at the throttle body assembly using the J 38185 .
6. Connect the surge tank inlet hose to the surge tank.
7. Disengage tension and reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .
8. Install the radiator support. Refer to Radiator Support Replacement (See: Radiator/Service and Repair) .
9. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Service and Repair)Cooling System Draining and Filling
(Static Fill) (See: Service and Repair) .