Corvette V8-6.2L (2008)
Heater Core: Service and Repair
Heater Core Cover Replacement
Heater Core Cover Replacement
Removal Procedure
1. Remove the HVAC module. Refer to HVAC Module Assembly Replacement (See: Heating and Air Conditioning/Housing Assembly
HVAC/Service and Repair) .
2. Disconnect the HVAC module wiring harness retainer pin (2) from the HVAC module.
3. Disconnect the wiring harness from the heater core cover wire harness retainer (1) and reposition the wiring harness aside.
4. Disconnect the wiring harness from the heater core cover wire harness retainer (3) and reposition the wiring harness aside.
5. Disconnect the discharge temperature management (DTM) sensor electrical connectors.
