Corvette V8-6.2L (2008)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement
Heater Inlet Hose Replacement
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Service and Repair)Cooling System Draining and
Filling (Static Fill) (See: Service and Repair) .
2. Disengage tension on the heater inlet hose clamp at the heater pipe assembly.
3. Disconnect the heater inlet hose from the heater pipe assembly.
4. Disconnect the heater inlet hose from the underhood junction box retainer clip.
5. Disengage tension on the heater inlet hose clamp at the water pump.
6. Disconnect the heater inlet hose from the water pump.