Corvette V8-6.2L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
7. Install the heater pipe assembly retaining bolt (1).
Tighten the bolt to 10 N.m (89 lb in).
8. Remove cap or plug from the heater hoses.
9. Connect heater inlet and outlet hoses to the heater pipe assembly.
10. Install the heater hose clamps into position using the J 38185 .
11. Install the rear evaporator line assembly. Refer to Air Conditioning Evaporator Rear Tube Replacement (See: Heating and Air
Conditioning/Hose/Line HVAC/Service and Repair/Air Conditioning Evaporator Rear Tube Replacement) .
12. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Service and Repair)Cooling System Draining and Filling
(Static Fill) (See: Service and Repair) .
