Corvette V8-6.2L (2008)
5. Connect the radiator outlet hose to the radiator.
6. Engage tension on the radiator outlet hose clamp at the radiator.
7. Lower the vehicle.
8. Vehicle equipped with a transmission oil cooler, connect the upper transmission oil cooler line to the radiator. Refer to Transmission Fluid Cooler
Hose/Pipe Quick-Connect Fitting Disconnection and Connection (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid
Line/Hose/Service and Repair) .
9. Vehicles equipped with a engine oil cooler, connect the upper engine oil cooler line to the radiator. Refer to Engine Oil Cooler Hose/Pipe
Replacement (w/o KPS) (See: Engine/Engine Lubrication/Oil Cooler/Service and Repair/Engine Oil Cooler Hose/Pipe Replacement (w/o KPS)
)Engine Oil Cooler Hose/Pipe Replacement (KPS) (See: Engine/Engine Lubrication/Oil Cooler/Service and Repair/Engine Oil Cooler Hose/Pipe
Replacement (KPS)) .
10. Connect the surge tank inlet hose to the radiator.
11. Engage tension on the surge tank inlet hose clamp at the radiator.
Important: Lift up on the cooling fan and shroud assembly and engage the tabs to the radiator slots.
12. Install the cooling fan and shroud assembly to the radiator. Refer to Cooling Fan and Shroud Replacement (See: Radiator Cooling Fan/Service
and Repair) .