Corvette V8-6.2L (2008)
Important:
*
When using the valve train components again, always install the components to the original location and position.
*
Valve lash is net build, no valve adjustment is required.
1. Lubricate the valve rocker arms and pushrods with clean engine oil.
2. Lubricate the flange of the valve rocker arm bolts with clean engine oil.
3. Install the valve rocker arm pivot support.
Important: Ensure the pushrods seat properly to the valve lifter sockets.
4. Install the pushrods.
Important:
*
Ensure the pushrods seat properly to the ends of the rocker arms.
*
DO NOT tighten the rocker arm bolts at this time.
5. Install the rocker arms and bolts.
