Corvette V8-6.2L (2008)
Oil Pan: Service and Repair
Oil Pan Cover Replacement
Oil Pan Cover Replacement
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
2. Remove the oil pan cover retaining bolts.
3. Remove the cover.
4. Remove the gasket.
Installation Procedure
1. Position the gasket and cover on the engine block.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the retaining bolts for the cover.
Tighten the retaining bolts to 12 N.m (106 lb in).
3. Lower the vehicle.
