Corvette V8-6.2L (2008)
7. Lubricate the MAP sensor grommet (715) with clean engine oil.
8. Install the MAP sensor (714) and grommet (715).
9. Install the EVAP valve (730), bracket (741), and bolt (742).
Tighten the bolt to 50 N.m (37 lb ft).
10. Install the EVAP tubes (729, 735).
11. Install the fuel rail. Refer to Fuel Rail and Injectors Installation (6.2L) (See: Service and Repair/Overhaul)Fuel Rail and Injectors Installation
(7.0L) (See: Service and Repair/Overhaul) .
12. Reconnect the electrical connector for the MAP sensor.
13. Install the vacuum hose for the brake booster.