Corvette V8-6.2L (2008)
12. Install the J 42386-A and bolts. Use 1 M10-1.5 x 120 mm bolt and 1 M10-1.5 x 45 mm bolt for proper tool operation.
Tighten the J 42386-A bolts to 50 N.m (37 lb ft).
13. Tighten the camshaft sprocket bolt.
1. Tighten the camshaft sprocket bolt a first pass to 75 N.m (55 lb ft).
2. Tighten the camshaft sprocket bolt a final pass an additional 50 degrees using the J 45059 .
14. Remove the J 42386-A and bolts.
15. Remove the automatic transmission flex plate or manual transmission flywheel and bolts. Refer to Engine Flywheel Removal (6.2L) (See: Service
and Repair/Overhaul)Engine Flywheel Removal (7.0L) (See: Service and Repair/Overhaul) .
16. Install the oil pump. Refer to Oil Pump, Screen and Crankshaft Oil Deflector Removal (6.2L) (See: Service and Repair/Overhaul) .
