Corvette V8-6.2L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the water pump bolts.
1. Tighten the water pump bolts a first pass to 15 N.m (11 lb ft).
2. Tighten the water pump bolts a final pass to 30 N.m (22 lb ft).
3. Install the heater inlet and surge tank outlet hoses to the water pump.
4. Position the heater inlet and surge tank outlet hose clamps at the water pump.
5. Install the inlet and outlet hoses to the water pump.
6. Position the inlet and outlet hose clamps at the water pump.
7. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory (See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Drive Belt Replacement - Accessory) .
8. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Cooling System/Service and Repair)Cooling System
Draining and Filling (Static Fill) (See: Cooling System/Service and Repair) .