Corvette V8-6.2L (2008)
5. Remove the exhaust pipe hanger lower nuts (1).
6. Remove the intermediate pipe-to-catalytic converter pipe nuts (1) and the exhaust pipe seals (2).
7. Lower the jack stands.
8. Remove the intermediate pipe from the jack stands.
Installation Procedure
Caution: Refer to Protective Goggles and Glove Caution (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Warning) .
Important: If reinstalling the original intermediate pipe, the tail pipe/muffler band clips must be replaced. Mark the position of the band
clips on the intermediate exhaust pipe. Remove the band clips by grinding the welds. Install new band clips on the intermediate pipe.
Position the new band clips using the alignment mark created previously.
1. Using a wire brush, clean the contact area of the left and right mufflers to the intermediate pipe.
2. Apply a small amount of lubricant on the intermediate pipes and the left and right mufflers
