Corvette V8-6.2L (2008)
Air Door Actuator / Motor: Service and Repair
Mode Valve Assembly Replacement
Mode Valve Assembly Replacement
Removal Procedure
1. Remove the HVAC module. Refer to HVAC Module Assembly Replacement (See: Housing Assembly HVAC/Service and Repair) .
2. Disconnect the left-hand (LH) air temperature actuator electrical connector.
3. Remove the LH actuator retaining screws.
4. Remove the LH actuator.
5. Disconnect the mode actuator electrical connector.
6. Disconnect the right-hand (RH) air temperature actuator electrical connector.
7. Remove the actuator support bracket retaining screws.
8. Remove the actuator support bracket and actuators.