Corvette V8-6.2L (2008)
4. Install the I/P cluster assembly. Refer to Instrument Cluster Replacement (See: Instrument Panel, Gauges and Warning Indicators/Instrument
Cluster / Carrier/Service and Repair/Instrument Cluster Replacement) .
5. Recalibrate the actuators. Refer to Actuator Recalibration (See: Testing and Inspection/Programming and Relearning) .
Mode Actuator Replacement
Mode Actuator Replacement
Removal Procedure
1. Remove the SIR bracket. Refer to Instrument Panel Inflatable Restraint Module Bracket Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair) .
2. Disconnect the mode actuator electrical connector.
3. Remove the mode actuator mounting screws.
4. Remove the mode actuator.
Installation Procedure
