Corvette V8-6.2L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the recirculation housing retaining screws.
Tighten the screws to 1.6 N.m (14 lb in).
5. Connect the HVAC module wiring harness to the recirculation housing (1).
6. Install the recirculation actuator.
7. Install the recirculation actuator screws.
Tighten the screws to 1.6 N.m (14 lb in).
8. Connect the recirculation actuator electrical connector.
