Corvette V8-6.2L (2008)
Condenser HVAC: Service and Repair
Condenser Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
Important: The condenser and receiver dehydrator are integrated and cannot be serviced separately.
1. Recover the refrigerant from the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Procedures/Refrigerant
Recovery and Recharging) .
2. Remove the upper radiator support. Refer to Radiator Support Replacement (See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service
and Repair) .
3. Remove the A/C compressor hose assembly to A/C condenser fitting bolt.
Important: Cap or tape the open A/C components immediately to prevent system contamination.
4. Disconnect the A/C compressor hose assembly from the A/C condenser fitting.
5. Remove and discard the seal washer.
6. Cap or tape the A/C compressor hose assembly.
7. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
