Corvette V8-6.2L (2008)
3. Install the TXV to the evaporator core.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the TXV to evaporator core mounting bolts.
Tighten the bolts to 7 N.m (62 lb in).
5. Install the rear evaporator line assembly. Refer to Air Conditioning Evaporator Rear Tube Replacement (See: Hose/Line HVAC/Service and
Repair/Air Conditioning Evaporator Rear Tube Replacement) .
6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Procedures/Refrigerant Recovery
and Recharging) .
7. Leak test the fittings of the component using J 39400-A .
