Corvette V8-6.2L (2008)
6. Remove A/C refrigerant filter from the front evaporator inlet line.
7. Remove and discard the seal washer from the front evaporator inlet line.
8. Cap or tape off the front evaporator inlet line.
Installation Procedure
1. Remove the cap or the tape from the front evaporator inlet line.
2. Install a new seal washer to the front evaporator inlet line. Refer to Sealing Washer Replacement (See: Coupler HVAC/A/C Coupler
O-ring/Service and Repair/Sealing Washer Replacement) .
3. Install the A/C refrigerant filter to the front evaporator inlet line.
4. Remove the cap or tape from the A/C condenser.