Corvette V8-6.2L (2008)
2. Install the inside air temperature sensor.
3. Connect DIC to the I/P.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the DIC retaining screw.
Tighten the screw to 1.9 N.m (17 lb in).
5. Install the knee bolster. Refer to Driver Knee Bolster Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair) .
