Corvette V8-6.2L (2008)
Fluid - A/T: Procedures
Transmission Fluid Fill Procedure
Notice: Use Dexron VI transmission fluid only. Failure to use the proper fluid may result in transmission internal damage.
Perform this procedure for vehicles with transmissions that are not equipped with a fill tube and dipstick. Based on accessibility, transmission fluid may
be added through the fluid fill tube plug assembly (1) hole or through the oil level check plug (2) hole in the bottom of the transmission fluid pan.
Tools Required
*
DT 47784 Transmission Fluid Fill Pan Adapter
*
J 45096 Transmission Oil Cooling System Flush and Flow Test Tool
*
J 45096-30 Transmission Cooler Flush Adapters
*
J 45096-40 Transflow Oil Fill Adapter
Fill Tube Plug Method
Fill Tube Plug Method
Notice: Before removing the transmission fluid fill tube plug assembly, thoroughly clean around the plug to prevent dirt or contaminants from
entering the transmission during plug removal. Use compressed air to dislodge any caked dirt that may be stuck on and around the plug area. Use a
mirror to confirm the area is free of dirt before removing the plug. Failure to clean around the plug may result in transmission contamination.
1. Clean around the fluid fill tube plug.
