Corvette V8-6.2L (2008)
Notice: Refer to Fastener Notice .
4. Install the sensor nut and position the sensor body parallel to the inside wheel surface while torquing.
*
For domestic vehicles tighten the sensor nut to 7 N.m (62 lb in).
*
For export vehicles tighten the sensor nut to 12 N.m (106 lb in).
Important: To avoid tire pressure sensor damage when mounting the tire back on the wheel maintain a tolerance between the tire
machine, or irons, tire bead and the sensor.
5. Install the tire on the wheel. Refer to Tire Mounting and Dismounting (See: Tires/Service and Repair/Procedures/Tire Mounting and Dismounting
) .
6. Install the tire/wheel assembly on the vehicle. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
7. Lower the vehicle.