Corvette V8-6.2L (2008)
Position the (suspension contact) rear lift under the rear tire and wheel assemblies.
Vehicle Jacking
When you are lifting a vehicle with a vehicle jack or a service jack, block the wheels at the opposite end from which you are lifting. Use jack stands to
provide additional support.
Under the Frame Rails - Front
Important: Use only service jacks utilizing 64 mm (21/2 inch) or smaller diameter lifting pads, to reduce the possibility of contact with
undesired areas of the vehicle:
The service jack lift pad must not contact the front fenders, or the floor pan.
Position the service jack lift pad as follows:
Under the frame rail shipping slot reinforcements (1).
Under the Frame Rails - Rear
Important: Use only service jacks utilizing 64 mm (21/2 inch) or smaller diameter lifting pads, to reduce the possibility of contact with
undesired areas of the vehicle:
The service jack lift pad must not contact the rocker panels, or the floor pan.
Position the service jack lift pad as follows:
